Ross Abekas Tria+ UHD, User Manual

Page: 31 / 68

paused. The VI helps to eliminate vertical hopping during slow motion playback and jagged edges in paused
images.
• Field
— select this option if the clip was shot in an interlaced video format and you don't want to apply vertical
interpolation (VI) to it.
Note: The server does not support video format conversion. If a clip is in a different video format than the server is operating in you
will not be able to load it into a channel transport.
5. In the Play Repeat area, select the repeat mode you want to use for the clip.
•
OFF — play repeat is turned off by default when the clip is loaded.
•
Loop — play repeat loop is turned on by default when the clip is loaded. When the clip starts playing, it
immediately seeks to the Play Repeat IN point and plays until it reaches the Play Repeat OUT point. When it
reaches the Play Repeat OUT point it seeks back to the Play Repeat IN point and plays again.
• Ping Pong
— play repeat ping-pong is turned on by default when the clip is loaded. When the clip starts
playing, it immediately seeks to the Play Repeat IN point and plays until it reaches the Play Repeat OUT
point. When it reaches the
Play Repeat OUT
point it starts playing in reverse until it reaches the
Play Repeat
IN point again.
•
Loop To — play repeat loop to play is turned on by default when the clip is loaded. The clip starts playing
from the beginning passing through the Play Repeat IN point and continues playing until it reaches the Play
Repeat OUT point. When it reaches the Play Repeat OUT point it seeks back to the Play Repeat IN point
and plays again.
•
Ping Pong To — play repeat ping pong is turned on by default when the clip is loaded. When the clip starts
playing, it immediately seeks to the Play Repeat IN point and plays until it reaches the Play Repeat OUT
point. When it reaches the Play Repeat OUT point it starts playing in reverse until it reaches the Play Repeat
IN point again..
6. Use the Play Repeat IN and Play Repeat OUT fields to the set the timecode for the in and out points of the clip.
•
Play Repeat IN — the first inclusive field/frame of the repeated portion of the clip. By default this is the first
field/frame of the clip.
• Play Repeat OUT
— the field/frame before the last field/frame of the repeated portion of the clip. By default
this is one field/frame beyond the end of the clip.
7.
Click
OK
.
To Edit the Timecode Metadata of a Clip
The timecode metadata sets the source of the timecode information for the clip.
1.
Select the clip in the Clip Library you want to edit the metadata for.
Note: You cannot edit the metadata of a clip if it is locked.
2. Click Clip Library > Modify... .
3. Click on the Timecode tab.
Tria+ UHD User Manual — Clip Library • 31