PIR Solar Spotlight/PIR Solaire Lumière
RSL-112 User Manual
1
2/ drill 4 holes on the wall based on the four
tubes in the battery back cover, insert the
bulged tubes in the holes, and fix the battery
back cover with screws.
3/ slip the solar light body up to down until the
hasp inside is connected, fix the body with
screws
.
4/ adjust the angle of light head & PIR sensor
1·Solar light parts
2·Battery Charge
In normal condition, the batteries inside the solar light are fully charged. You can use the light directly. If
not, please fully charge the batteries before using: turn the switch “on” for sunny daytime and turn it
“off” when darkness comes. Repeating for 2 days (about 16 hours), the batteries would be fully
charged.
3·Solar Light Body Installation
1/ loose the screws and remove the
battery back cover from the light
solar light head
④
battery back cover
①
solar light body
③
PIR sensor
⑦
plug
⑤
solar panel
⑥
panel base
⑾
screw
⑩
socket
⑿
on/off switch
⑧
screw*6
⑨
bulged tube*6
