![background image](http://html1.mh-extra.com/html/quoizel/crg9010mb/crg9010mb_manual_3843476001.webp)
1of2
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
,
.
.
.
2016 QuoizelInc.
Package Contents
A
Mounting Screw
x 3
Fixture
Body
x 1
Assembly Instruction Sheet #IS-CRG9010MB
For Style CRG9010MB
B
Fixture
Hood
x 1
C
ReleasedDate:2017-09-13
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-800-645-3184
or visit us on-line at www.quoizel.com
D
Glass Panel
x 4
E
Lock Screw
x 4
F
Tab
x 4
STEP 1
Install Bulb and Fixture Hood
(See view A)
-
A. Insert Glass Panels (C) into the slot in the bottom edge of the Cage
properly. Place Clips (G) on the top edge of the Cage to hold Glass
Panels (C), secure by threading Flat Head Screws (H) onto Cage .
Tighten until sung.
B. Insert bulb onto socket and screw snugly into place
C. Attach Fixture Hood (B) onto top edge of Cage and align holes on
Socket
Figure 1
B
F
D
E
the Fixture Hood (B) to mounting
holes on Tabs at the top edge of the
Cage. Attach Tabs (E) onto fixture
hood and secure with Lock Screws
(D). Tighten until snug with
screwdrivers.
Slot
G
Clip
x 2
H
Flat Head
Screw
x 4
C
Slot
G
H
View A
.
Cage
Warnings and Cautions
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We strongly
recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool before removal.
Please go to
for product cleaning tips. Go to the
selection.
(1) A21 Medium Base bulb 150W Maximum or
(1) Medium Base Vintage bulb is recommended but not supplied.
20-30 minutes
Identify and inspect all parts before beginning installation. Check package content list and diagrams below to be sure all parts are
present. If any parts are missing or damaged, do not attempt to assemble, install, or operate the fixture. Contact customer service for replacement
parts.
www.quoizel.com
Care + Maintenance
Light Source:
Estimated Assembly Time:
Preparation:
Tools Required:
Flathead screwdriver, Phillips screwdriver, pliers, wire cutters, wire strippers, electrical tape, safety glasses.
Vintage Bulb
(recommended
but not supplied)
STEP 2
Drill Pilot Holes on Post
-
A. Carefully fit the Post Fitter over the end of the
Post (not supplied), making sure the Post
Fitter is fully seated.
B. Mark the drill point for the (3) Mounting
Screws, using (3) Mounting Holes as
reference. After marking hole locations,
remove fixture from post and drill 1/16” pilot
holes for screws.
Post
Post Fitter
Figure 2
Mounting Hole
White wire
from supply
White wire
from fixture
Black wire from
supply (or Red)
Black wire
from fixture
Ground wire
from supply
Ground wire
from fixture
Figure 3
STEP 3 - Wire Connections
A. Use standard wire connectors (not included) to make all wire
connections. Twist connectors until wires are tightly joined
together. Wrap each connection with approved electrical tape and
carefully stuff all the connected wires into the Outlet Box.
STEP 4
Attach Fixture Body to Post
-
A. Coat the top 1” of the Post with Clear
Silicone Caulk (not supplied) and
position the Post Fitter onto the Post. Be
sure to seat it completely, aligning the
holes in the Fitter with the 1/16” Pilot
Holes drilled into the Post.
B. Secure the Fixture to Post with (3)
Mounting Screws (A).
Your fixture is now assembled and
ready to use. Enjoy!
Post
Post Fitter
Figure 4
Mounting Hole
A