DANCING FLAME SOLAR LED
POST LIGHT, 2-PACK
INA-900
Please read this manual carefully before use and keep it for future reference.
03/2019
SL-7130
Page 1 / 2
FIRST TIME USE -
Ensure the power is switched to 'ON' while charging.
Remove the solar panel from the lamp by twisting it off the body of the lamp. Switch the power
'ON' and replace the panel onto the lamp body.
The solar light will require at least 8 hours of full and direct sunlight to fully charge the battery.
Make sure the unit is turned 'ON' while charging. As long as the battery has a sufficient
charge, the product will automatically illuminate when it gets dark, and turn off during the day.
HOW SOLAR LIGHTS WORK
During the day, the solar panel converts solar energy into electricity and
stores it in the rechargeable battery. At night, the light turns on automatically
via a light detecting sensor built into the unit. How long the light illuminates
will depend upon the location of the light, weather conditions, and how much
direct sunlight the unit is exposed to.
ASSEMBLY & INSTALLATION
STAKE OPTION:
1. Insert stake (E) into the ground.
2. Gently assemble the pole by
stacking tube (C) and connector
(D) as shown.
3. Place lamp (B) onto the
assembled pole.
LAMP POST OPTION:
1. Insert stake (E) into the ground.
2. Gently assemble the pole by
stacking tube (C) and connector
(D) as shown.
3. Place lamp extension (G) onto
the assembled pole and secure
with thumb screw (I).
4. Attach toppers (H) and (F).
5. Hang lamp (B) onto lamp
extension (G).
PARTS
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase,
with the date of purchase as well as photos of the merchandise defect must be provided. Photos are used to
determine the cause of defects and for future quality control.
If you have any questions, comments or concerns, feel free to contact us by phone at
888-881-4668
, by email:
