26
Rosenbauer - RLS1000
STORAGE
If the RLS1000 is to be left unused for an extended period of time or the unit is to be
put into storage then the battery must be fully charged and the the light head plug
must be disconnected from the battery unit to prevent any accidental switch on. The
unit can then be stored up to 6 months without having to recharge.
MAINTENANCE
Your RLS1000 should need little or no maintenance during its life span other than
periodic cleaning of the exterior surfaces where we suggest using a light detergent and
water to sponge off any dirt deposits. Should you encounter a problem then please
contact us for technical assistance. We suggest the unit be returned to us for any
problems that can’t be rectified by telephone. Please note there are no user
serviceable parts inside and that a competent person must carry out any repairs.
RECYCLING AND THE ENVIRONMENT
Your RLS1000 contains various parts that need to be recycled at the end of its life
span, please contact your original point of purchase to organise correct recycling of
this product to help protect the environment.
TROUBLESHOOTING
1. LIGHT DOESN’T POWER UP WHEN
(BUTTON 1) IS PRESSED
a) Is light head plug inserted all the way? Make sure plug is inserted fully and locking
ring turned clockwise.
b) Is the battery charged up? Recharge battery fully.
2. LIGHT COMES ON BUT FLICKERS WHEN
(BUTTON 1) IS PRESSED
a) Incompatible battery fitted in LED worklight base unit – only use approved
replacement batteries available through your point of purchase.
