21
GB
RLS1000 - Rosenbauer
RLS1000 - Rosenbauer
(Button 4) = SELECT - To select between the different flashing signal
light colours red, green, amber, blue and white.
See page 5 for further information on the controls.
Light management
The unit features an infinitely variable focussing system which is adjustable from a
tightly focused spot beam through to a fully diffused flood of light providing optimum
lighting for every working environment. Use the two control knobs together to move
the diffuser blind up and down in front of the LEDs, as the blind gradually passes over
the LEDs you’ll notice the projected light pattern change.
Adjusting Beam from Spot to Flood
INCREASE SPOT
INTENSITY
INCREASE FLOOD
INTENSITY
Controls
ON / OFF BUTTON - Press “ON / OFF”
▪
x 1 = On
▪
x 2 = Off (button must be pressed and held
for 2-3 seconds continuously to switch off.
This is to prevent accidental switch off.)
MODE BUTTON - Press “MODE”
▪
x 0 = Work Light Mode - white power LEDs
(Default setting)
▪
x 1 = Signal Light Mode - RGB coloured
signal LEDs
Repeated pressing will switch between work light
mode and signal light mode.