Rosemount 890, Instruction Manual

Page: 30 / 96

U
NPACKING AND
I
NSTALLATION
Rosemount Analytical 748460-A January 2000
2-10
2.11 ORDERING OPTION KITS
Options not ordered from the factory at the time of purchase may be ordered as the
following kits:
•
624422 Isolated Remote Control Kit
•
624207 Dual Alarm Kit
•
654398 Fail Safe Dual Alarm Kit
•
624424 Auto Zero/Span Control Kit
•
624426 Calibration Gas Control Kit
The option kit consists of the circuit board, a cable gland and two circuit card guides
which are inserted into predrilled holes in the card cage. Mount the option in the card
guides and follow the wiring directions in section 2.10. There are five connectors on
the interconnect cable. It is important for the slot to be connected to the correct
connector on the interconnect cable.
To install any of the above kits, the Common Parts Kit, PN 624414, must be ordered if
not originally ordered with the analyzer. This kit consists of a card cage which mounts
in the rear of the case and three interconnect cables that plug in as shown on
Drawings 652715 and 656911. Once this kit is installed, it need not be ordered again
for other kits.