Rosemount 8732E, Quick Installation Manual

Page: 22 / 60

Quick Installation Guide
00825-0100-4662, Rev CB
July 2011
Rosemount 8732
22
Table 9. Handheld Fast Keys (HART Handheld Communicator) and LOI Keys
Local Operator Interface
To activate the optional Local Operator Interface (LOI), press the DOWN arrow two times.
Use the UP, DOWN, LEFT, and RIGHT arrows to navigate the menu structure. A map of the
LOI menu structure is shown on page 23. The display can be locked to prevent unintentional
configuration changes. The display lock can be activated through a HART communication
device, or by holding the UP arrow for 10 seconds. When the display lock is activated, DL
will appear in the lower left hand corner of the display. To deactivate the display lock (DL),
hold the UP arrow for 10 seconds. Once deactivated, the DL will no longer appear in the
lower left hand corner of the display.
Function HART Fast Keys
Process Variables 1, 1
Primary Variable (PV) 1, 1, 1
PV Percent of Range 1, 1, 2
PV Analog Output (AO) 1, 1, 3
Totalizer Set-Up 1, 1, 4
Totalizer Units 1, 1, 4, 1
Gross Total 1,1,4,2
Net Total 1,1,4,3
Reverse Total 1,1,4,4
Start Totalizer 1,1,4,5
Stop Totalizer 1,1,4,6
Reset Totalizer 1,1,4,7
Pulse Output 1,1,5
Basic Setup 1,3
Tag 1,3,1
Flow Units 1,3,2
PV Units 1,3,2,1
Special Units 1,3,2,2
Volume Unit 1,3,2,2,1
Base Volume Unit 1,3,2,2,2
Conversion Number 1,3,2,2,3
Base Time Unit 1,3,2,2,4
Flow Rate Unit 1,3,2,2,5
Line Size 1,3,3
PV Upper Range Value (URV) 1,3,4
PV Lower Range Value (LRV) 1,3,5
Calibration Number 1,3,6
PV Damping 1,3,7
Review 1,5
4662RevCBQIG.fm Page 22 Wednesday, July 6, 2011 3:41 PM