Rosemount 5401, Reference Manual

Page: 108 / 180

Reference Manual
00809-0100-4026, Rev FA
July 2009
Rosemount 5400 Series
7-18
CONFIGURATION
REPORT
This
Rosemount Radar Master
(RRM) function shows the configuration
changes made to the transmitter compared to the factory configuration. The
report compares a specified backup file with the default transmitter
configuration.
To open the Configuration Report, choose the
Tools > Configuration Report
menu option:
Figure 7-15. The Configuration
Report window in Rosemount
Radar Master.
Information is presented on antenna type, software versions, software and
hardware configuration and unit code.
VIEWING INPUT AND
HOLDING REGISTERS
Measured data is continuously stored in the
Input Registers
and by viewing
the contents, advanced users can check if the transmitter is working properly.
The
Holding Registers
store various transmitter parameters, such as
configuration data, used to control the measurement performance.
By using the RRM program, most Holding Registers can be edited by typing a
new value in the appropriate Value input field. Some Holding Registers can be
edited in a separate window and the individual data bits can be changed.
To view the Input/Holding registers in RRM, the Service Mode must be
activated:
1. Choose the
Enter Service Mode
option from the
Service
menu.
2. Type the password (default password is “admin”).
3. The
View Input / Holding Registers
option is now available.
4. Choose the
View Input / Holding Registers
option from the
Service
menu.
5. Click the
Read
button. To change a Holding register value, type a new
value in the corresponding
Value
field. Click the
Store
button to save the
new value.