Rosemount 4088A MultiVariable, Quick Start Manual

Page: 15 / 32

Quick Start Guide
15
September 2016
6.0 Verify device configuration
Use RTIS with the Rosemount 4088 DTM or a HART Field Communicator with the
Rosemount 4088 Device Descriptor to communicate with and verify
configuration of the Rosemount 4088 MultiVariable transmitter.
Figure 14 shows the wiring connections necessary to power a Rosemount 4088
MultiVariable Transmitter and enable communications with a PC-based software
tool or handheld Field Communicator.
6.1 Transmitter wiring
Figure 14. Configuration via HART
®
(local) Port
It is not required to remove the Rosemount 4088 from the RS-485 network when
configuring over the local HART port. The device should be taken out of service or
put in manual prior to performing any configuration changes.
A. Rosemount transmitter interface software (RTIS)
B. HART modem
C. Handheld communicator
D. User-provided power supply
A
B
C
D
OR