Rosemount 2240S, Reference Manual

Page: 62 / 100

Reference Manual
300550EN, Rev AA
December 2010
Rosemount 2240S
6-4
Section 6. Service and Troubleshooting
6.2.3 Diagnostics
The TankMaster WinSetup program lets you view the current device status in
the View Diagnostic Registers window. It shows a selection of database
registers that gives you an instant view of how the device operates. You may
configure the window by adding registers of special interest.
To view and configure the diagnostic registers:
1. Select the ATD device icon in the TankMaster WinSetup workspace.
2. Click the right mouse button and choose View Diagnostic Registers .
The register values in the View Diagnostic Registers window are of “read
only” type. They are loaded from the device as the window is opened.
In the Value column a grey background color in a table cell means that the
register is of either Bitfield or ENUM type. An expanded Bitfield/ENUM
window can be opened for this type of register by double-clicking the table
cell.
If needed, the values can be presented as hexadecimal format. This applies
to registers of the Bitfield and ENUM types. Select the
Show in Hex check
box to present Bitfield and ENUM registers as hexadecimal figures.
The Configure button lets you open the Configure Diagnostic Registers
window to change the list of registers to be displayed in the View Diagnostic
Registers window. See the Raptor System Configuration Manual (Document
No. 300510EN) for more information.
In the Configure Diagnostic Registers window a Log Setup button provides
access to the Register Log Scheduling window which allows you to setup a
log schedule for automatic start and stop of register logging.