Reference Manual
300550EN, Rev AA
December 2010
6-17
Rosemount 2240S
Section 6. Service and Troubleshooting
6.3.2
Device Warnings
Table 6-5 shows a list of warning messages for the Rosemount 2240S
Multi-input Temperature Transmitter. The warnings may appear on the display
of a Rosemount 2410 Tank Hub and in the Rosemount Tankmaster program.
Warnings are less serious than errors.
Detailed information about the different warning messages can be found in
Input registers 1050 to 1070 as shown in Table 6-5.
See “Viewing Input and Holding Registers” on page 6-2 for more information
on how to view Input registers.
Table 6-5. Device warnings for
the 2240S Multi-input
Temperature Transmitter
Message
Description
Action
RAM warning
Input register no. 1050
(1)
.
Bit 0: stack is low
Contact Emerson Process
Management/Rosemount TankGauging
service department.
FPROM warning
Input register no. 1052.
Not used.
HREG warning
Input register no. 1054.
Bit 0: default Holding register values
used
Contact Emerson Process
Management/Rosemount TankGauging
service department.
Other memory warning
Input register no. 1056.
Not used.
Display warning
Input register no. 1058.
Not used.
Modem warning
Input register no. 1060.
Not used.
Other HW warning
Input register no. 1062.
Bit 9: PTB reference out of limits.
Contact Emerson Process
Management/Rosemount TankGauging
service department.
Measurement warning
Input register no. 1064.
Not used.
Internal temperature warning
Input register no. 1066.
Bit 0: out of range.
Contact Emerson Process
Management/Rosemount TankGauging
service department.
SW warning
Input register no. 1068.
Bit 1: stack low
Bit 2: software startup
Configuration warning
Input register no. 1070.
Bit 0: Invalid linear table
Bit 1: Non continous sensor positions
Bit 2: Median filter not odd
Bit 3: No configuration of water level
sensor available
Bit 8: Number of configured sensors
exceeds model code value
Bit 9: Sensor type not supported in
model code
Bit 10: Sensor bus not supported in
model code
Bit 11: Invalid model code string
Bit 12: Invalid model code
(1) The register number refers to the internal Input Register in the 2240S database.
Summary of Contents for 2240S
Page 2: ......
Page 4: ......
Page 84: ...Reference Manual 300550EN Rev AA December 2010 Rosemount 2240S A 6 Appendix A Reference Data ...
Page 99: ......
