INSTALLATION
Orion Extender Installation and Operation Manual
38
Installation
It is recommended that first-time users initially set up the Orion Xtender system in a single room as a test setup.
Doing so allows for identification and resolution of any cabling problems, and provides a more convenient way
to experiment with the system.
Prior to installation, please verify that interconnect cables, interfaces, and handling of the devices comply with
the system specifications laid out in Appendix A.
The installation of the Orion Xtender system has two parts; the Extender module set up, and the Upgrade
Module(s) set up.
Extender Module Setup
The main component of the Extender module is the video card. This section describes the steps to set up the
Extender module.
1. Switch off all devices.
Receiver Unit Installation
2. Connect the monitor(s), keyboard and mouse to the Receiver unit.
3. Plug the interconnect cable(s) into the Receiver unit.
4. Connect the 5VDC power supply to the Receiver unit.
Transmitter Unit Installation
5. Connect the source (computer, CPU) to the supplied cables to the Transmitter unit. Please ensure the
cables are not strained.
6. Connect the Transmitter unit to the interconnect cable(s).
7. Connect the 5VDC power supply to the Transmitter unit.
8. Power up the source.
To power up the system, the following sequence is recommended:
Monitor
→
Receiver unit
→
Transmitter unit
→
Source
Summary of Contents for Orion XTender OR2-SRDFSUD1D
Page 78: ......