p. 12
MODE ONE: 2 CH Forward Control
Mode One provides simple control of Gobo A and Gobo B using only two
channels of DMX. Channel 1 controls Gobo A, Channel 2 controls Gobo
B. Speed and direction of each gobo is adjusted by varying the level of the
appropriate channel. Adjust Channel 1 from 0 to 50% (0 – 127 DMX value)
to rotate Gobo A clockwise. Adjust Channel 1 from 51 – 99% (128 – 254) to
rotate Gobo A Counter-Clockwise. 0% (DMX 0), 50% (DMX 128) and 100%
(DMX 255) are full stop.
Adjust Channel 2 to control Gobo B similarly.
Note: Clockwise is determined when looking down the light path from the
point of view of the lamp, with the motor box facing away from you.
Mode 1 Channel assignments
CH
Level
DMX
Function / Result
1
0
0
Gobo A - Stop
2
0
0
Gobo B - Stop
1
1-49
1-127
Gobo A - CW (slow to fast)
1
50
128
Gobo A - Stop
1
51-99
129-254 Gobo A - CCW (slow to fast)
1
FL
255
Gobo A - Stop
2
1-49
1-127
Gobo B - CW (slow to fast)
2
50
128
Gobo B - Stop
2
51-99
129-254 Gobo B - CCW (slow to fast)
2
FL
255
Gobo B - Stop
MODE TWO: 2 CH - ML Center Inverse Control
Similar to Mode one, Mode Two provides simple two channel control of the
RevoPRO™. For programmers who prefer it, the speed and direction control is
more similar to that used by automated lighting programmers. Speed control
configuration is “center inverse.” In this mode, slowest speed in both direc-
tions is set at the 50% (DMX 128) point on the channel. To increase speed in
the clockwise directions, adjust the level down from 50% (DMX 128) to 1% for
full speed. 0% is full stop. To increase speed in the Counter Clockwise direc-
tion, adjust the level up from 50% to 99%.
Adjust Channel 2 to control Gobo B similarly
