www.rosco.com
5
UNPACKING
Carefully remove the unit from the box.
Do not attempt to operate LitePad Vector if there are any signs of physical damage. In case of
damage, contact your local Rosco dealer.
Ensure the Light Stand Receiver is securely mounted onto the yoke before rigging.
Your Rosco LitePad Vector will arrive with a power supply attached to the back of the unit, and
the power cord detached from the unit. Plug the IEC connector into the power supply.
Always use suitable length/size safety cables when hanging LitePad Vector, keeping in mind
the weight of the unit = 4.5 lb (2 kg)
Ensure that the yoke locking handle is correctly tightened after positioning LitePad Vector. If
the locking handle is not tightened correctly, the fixture may swing.
Rear Control
Panel
Yoke Locking
Handle
5/8” (16mm)
Light Stand
Receiver
Power Supply
