6
LITEPAD VECTOR USER’S GUIDE
Dimming
Control
Color Temp Control
(CCT Only)
& DMX Addressing
Output
(Dimming)
Color Temp (K)
DMX Address
Boost Indicator
DMX Presence
Indicator
CONTROLS
LitePad Vector can be controlled via the on-board, Rear Control Panel located on the back of the
fixture, or via user-supplied DMX512 data input.
Rear Control Panel
OPERATION
Powering On
1. LitePad Vector is supplied with a standard 12-24VDC switching power supply, which is
mounted in a cradle on the rear of the unit. A 2.1mm barrel connector brings DC power
from the power supply to the LitePad Vector.
a) LitePad Vector can be powered by V-Mount batteries. Remove the power supply
and cradle, and then replace it with an optional V-Mount Cheeseplate Battery Holder,
which includes a D-tap to 2.1mm barrel adapter.
b) LitePad Vector can be powered by Anton/Bauer batteries. An optional Anton/
Bauer Cheeseplate Battery Holder can be mounted onto either side of the yoke using
the mounting holes provided. The Anton/Bauer Cheeseplate Battery Holder includes a
D-tap to 2.1mm barrel adapter.
DMX In/Out
(RJ45)
