12
3.
Remove the plastic cover.
4.
Remove the lens mount plate from the unit by loosening the
three knobs on the front.
5.
Loosen the thumb screw on the lens barrel holding ring.
6.
Remove the dichroic glass ring from the rear of the lens barrel.
7.
Thread the lens barrel into the holding ring (CW screws it in).
8.
[Optional] Place a dichroic filter in the rear of the lens barrel.
9.
Replace the dichroic glass ring on the rear of the lens barrel.
10.
Replace the lens mount plate on the unit by lining up the
mounting pins, then tightening the three knobs.
11.
Tighten the thumb screw by hand to hold the lens barrel in
position.
12.
Replace the plastic front cover.
13.
Replace the face lock ring on the front of the unit.
Dichroic Glass Ring
Dichroic Filter
Thumb Screw
Lens Barrel
Knob
Plastic Cover
Cover Lock Ring
