Strawberry Server
User and Hardware Manual
10
C
C
h
h
a
a
s
s
s
s
i
i
s
s
R
R
e
e
a
a
r
r
a
a
n
n
d
d
F
F
e
e
a
a
t
t
u
u
r
r
e
e
s
s
Power Supply LEDs
PS2 Kybd / mouse
IPMI I/O
USB
VGA
Eth0
Eth1
10Gb/s
Ports
Eth3
HA option only
FC Storage
or SAN
Power Supply LEDs
The Strawberry Server has a 700 watt redundant power supply consisting of two power modules.
Each power supply module has an auto-switching capability, which enables it to automatically
sense and operate at a 100V - 240V input voltage. If either of the two power supply modules fail,
the other module will take the full load and allow the system to continue operation without
interruption. The PWR Fail LED will illuminate and remain on until the failed unit has been
replaced. Replacement units can be ordered directly from Rorke Data. The power supply units
have a hot-swap capability, meaning you can replace the failed unit without powering down the
system.
PS2 Keyboard / Mouse / USB VGA
Use these connections for Keybd, mouse, or monitor during setup. After setup, typically the
server will be administered remotely, these are not used.
IPMI I/O
The IP address for IPMI can be configured from the motherboard’s BIOS. Once configured, the
IPMI can be accessed from
http://ip_address
with username:
ADMIN
and password:
ADMIN
Contact tech support for connectivity and usage .
10Gb/s Ports
The built in 10Gb/s ports are typically used in a high bandwidth LAN configuration. Contact tech
support for connectivity and usage .
Fibre Channel [FC] I/O
Use this connection for your FC storage or to connect to the SAN so the Strawberry can see the
storage that your Strawberry clients will be using. Note that a FC SAN software client license is
needed if the Strawberry server joins a SAN.
Ethernet 0, 1, 3
These 1Gb/s ethernet connections are used to connect to the corporate LAN / internet, metadata
LAN management, and possibly another Strawberry as a heartbeat in a clustered High Availability
configuration.
NOTE: An Internet connection to the Strawberry server is required so that licensing and
updates can be done.
