13
TF 200.01.0018_ENG
4.4 Mounting to the wall
The attachment holes can be marked up on the wall, four possibilities in the top, and four in the bottom of the
frame. Place the frame against the wall and make sure it is horizontal. The frame is standing on two
adjustable feet. The holes in the frame are all Ø 10 mm. Remove the frame and drill the holes.
Attach the frame securely to the wall by using adequate bolts and rawlplugs suitable for the type of wall
construction / material on site. The Shower bed is being supplied with a set (8 pcs) of screws and rawlplugs,
which is ONLY used to mount the unit in a concrete wall. If the unit must be mounted on another kind of wall,
other kinds of plugs and screws must be used.
Changing bed has a max user weight of 200 kg.
Maximum load in the top screws is 40kg for each screw.
Caution!
If you have other objects mounted right next to this changing bed, you have to consider the
risk of trapping, and therefore consider a safe distance to the other objects.
Caution!
It is important that the frame is screwed securely to the wall. If the frame comes loose, a
person may fall off the shower bed.
Force for each of the four screws in top of the unit:
K
screw
= (200kg * 884mm)/(1122mm * 4 screws)
K
screw
= 40kg for each screw
Note!
Make sure that no dust or other obstacles are interfering with the rollers, chain, sprocket or
gas springs. This can cause malfunction and damage the system.
F=200kg
F=Screw
992
884
