Page | 17
TF 200.01.0020_ENG
5.1.3
Use of the control with lock function
•
UNLOCKING THE CONTROL WITH LOCK FUNCTION
Unless otherwise specified, the control cannot activate the motor columns, without
unlocking the control. This is done by pressing
🔔
,
Bluetooth
®
, then
⭐
, within one
second.
The control will lock again after 10 seconds if the control is not activated.
•
UP/DOWN
Driving the motor columns up or down, is done by first unlocking the control, then
pressing on the control from above or below.
•
DIFFERENT BUTTONS
The control with lock function comes with three built-in buttons other than up/down.
🔔
– Reminder intervals. DISABLED as per standard.
Bluetooth
®
- Bluetooth connectivity. DISABLED as per standard.
⭐
- Changes favorite position
-
Holding down the button for 2 seconds will save the current height.
2 positions can be saved at a time.
-
Holding down the button for 8 seconds will reset the favorite positions, showing a
red LED.
-
When driving the motors to the favorite position, the motors will stop for 1 second
when it is at a favorite position before continuing, if the Up/Down is continuously
held.
