Page | 19
TF 200.01.0020_ENG
5.1.6
Installation of brackets for coverplates
•
BEFORE CHOOSING THE BRACKETS FOR COVERPLATES, decide upon your
desired height adjustment. If the chosen height adjustment is greater than standard
(300mm (11.8in)), it is not recommended to use this accessory.
•
To mount coverplates with the brackets, see Concealment panels for Ropox Flexi, PDF
6163
5.1.7
Installation of support foot
•
NOTICE
– support foot can only be used if the wall bracket is mounted between 44-
58mm (1.7
–2.3in) above the floor.
•
BEFORE MOUNTING THE MOTOR COLUMNS ON WALL BRACKET, place the foot on
the bottom of the motor columns.
•
Mount the foot with the supplied M8x20 bolts in the two holes.
44-58mm
(1.7 - 2.3in)
