TF 200.01.0020_ENG
Page | 13
4.2.1D
Mounting the press pad
•
Drill a Ø12-15 (Ø
1
2
⁄ "
- Ø
5
8
⁄ "
) hole in the front fascia
•
Pull cable through hole in front fascia and connect the press pad, via the press pad cable, to the
control box
•
Mount the cable mounts on the underside of the tabletop and strap the cable to them
•
Carefully remove the protection paper, on the back of the press pad, while keeping your finger
between the cable-ribbon and the
adhesive, as these mustn’t stick to each other
•
Place the press pad on the front fascia
4.3
Installation of Bluetooth adapter
With a purchase of Ropox FlexiPlus, as a standard component, a Bluetooth adapter will always accompany
the product. This Bluetooth adapter allows the user to remotely connect to FlexiPlus using our app, Ropox
Connect, or with the wireless control, that can be acquired as an accessory.
To mount the Bluetooth adapter, follow the instructions below.
4.3.1
Mounting the Bluetooth adapter
Notice!
If the cable-ribbon sticks to the adhesive, the press pad might be destroyed.
Insert the Bluetooth adapter into 1 of
the 2 available control ports in the
control box
1
2
After the Bluetooth adapter has been
inserted, it will blink blue and is ready
for pairing
Note!
It is recommended, when multiple products need to be
connected, that 1 adapter is inserted at a time, and then saved.
