manualshive.com logo in svg

Ropex Resistron RES-5011, Operating Instructions Manual, Page: 22 / 76

Share
Download
Ropex Resistron RES-5011 Operating Instructions Manual Download Page 22

Device functions

Page 22

RES-5011

Version 2

8.2

EtherNet/IP

TM

 communication

The following sections only describe controller-specific functions. For general information on the EtherNet/IP

TM

interface and the system configuration, please refer to the description of your PLC.
The  controller  can  communicate  via  the  EtherNet/IP

TM

  interface  provided  the  24 VDC  supply  voltage

(terminals 5+7) is present.
If no line voltage is present however (e.g. if it is switched off in order to open a door), error code 901 or 201 (error
group 7, no line voltage / sync signal) appears on the controller and the alarm relay is switched. This happens due
to the absence of line voltage. The error message can be reset by switching on the line voltage again and setting
the RS bit (

section 8.5.3 "Reset (RS)" on page 24).

You can easily process the error code that appears if the line voltage is switched off  – or suppress switching of
the alarm relay – in the PLC program.

8.3

Device description file (EDS)

The configuring tools for the EtherNet/IP

TM

 scanner interpret the content of the device description files (EDS) and

use this information to create a parameter set for the EtherNet/IP

TM

 scanner which controls user data traffic.The

ROPEX_RES-5011_V2_4.eds file of the RES-5011 contains all essential controller information for the configura-
tion, e.g. the I/O data description, parameter descriptions etc. The device description files and the associated
image files (.BMP and .ICO) can be requested by e-mail (

[email protected]

) or downloaded from our website

(

https://ropex.de

).

If the controller already has an IP address, the device description file can also be downloaded from the integrated
web server. Alternatively, you can download it from the controller via the file object using CIP services.
After linking the required device description file into the configuring tool, you must assign an IP address to the con-
troller. DHCP is activated by default to enable the controller to request an IP address from a DHCP server in the
network. You must also select the desired parameter values.

Summary of Contents for Resistron RES-5011













































































Reviews:

No comments