Modifications (MODs) / optical data interface
RES-430
Page 7
5.2.1
Scope of supply / installation
The serial piggyback module is supplied with spacers
for installation on the motherboard of the RES-430.
Proceed as follows to install the module.
Schematic diagram:
5.2.2
Visualization software
A visualization software tool is provided for data
communication with a PC. This software shows all the
data for a heatsealing cycle (ACTUAL temperature,
closing force). You can also export the data as a CSV
file for further processing in another PC program.
In addition, the software permits the values in the
Configuration and Settings menus to be transferred to
the controller or read from it.
This visualization software is described in a separate
document.
Female connector, 5-pole
Male connector, 5-pole
Sub-D connector, 9-pole
for serial
data cable
4x spacer
RES-430 motherboard
Piggyback module
Latching
Snap-on
Connect the
of the 4 spacers to the
motherboard first. Then connect the piggyback module
to the
with the solder side up.
The 5-pole male connector on the motherboard must
insert into the 5-pole female connector on the
piggyback module.
latching end
snap-on end
Snap-on end
Latching end
RES-430 motherboard
Piggyback module
