ROOTECH Accura 2350-TEMP, Manual

Page: 20 / 44

Chapter 3 Accura 2350-TEMP Operation/Setup Accura 2350-TEMP User Guide
Page 20 ⓒ 2020 Rootech Inc. All Rights Reserved
Power Supply
Item Description
Power supply Receives power from the Accura 2300[S] device via the RJ12 communication cable
Current consumption 145 mA current is consumed when the backlight of the LCD screen and all LEDs are turned
on, and digital outputs are activated.
1
1. When the Accura 2350-TEMP module is connected with the Accura TSEN device, 15 mA current is additionally
consumed per Accura TSEN device.
LCD Screen
Module LCD
Accura 2350-TEMP 2.7 ” Graphic 80x128 Dots (40.0 x 58.0mm) FSTN LCD
The LCD screen consists of three operational modes as follows.
Mode Description
DISPLAY mode Displays measured values
SETUP mode Enables to check setup items and change it
EVENT mode Displays detailed event data
LED Status Indicators
Item Color Description
POWER Green It is turned on when the device is powered on.
EVENT Red It blinks red when an event occurs.
MODULE Orange It blinks orange when the Accura 2350-TEMP module normally communicates
with Accura 2300[S].
TSEN Orange It blinks orange when the Accura 2350-TEMP module normally communicates
with Accura TSEN.
LCD Control Button
Item Operation Description
Left[<] Short press
1
Used to move to the left
Up[ ∧ ] Short press Used to move upward
Down[ ∨ ] Short press Used to move downward
Right[>] Short press Used to move to the right
ESC Long press
2
Used to perform the Escape function
SETUP Long press Used to change the display mode to the SETUP mode
EVENT Long press Used to change the display mode to the EVENT mode
ENTER Long press Used to perform the Enter function
1. Press the button and release it immediately.
2. Release the button after pressing it for 0.5 seconds.