Accura 2350-TEMP User Guide
Chapter 3 Accura 2350-TEMP Operation/Setup
ⓒ
2020 Rootech Inc. All Rights Reserved
Page 19
Chapter 3 Accura 2350-TEMP Operation/Setup
Installed at the front of the distribution panel, the Accura 2350-TEMP module is connected with Accura
2300[S] using a communication cable. It receives power from Accura 2300[S] via the cable. The Accura
2350-TEMP module measures the external temperature of the distribution panel with its built-in
temperature sensor located at the front bottom of the device. By connecting with up to 6 Accura TSEN
devices using the daisy-chain method, the Accura 2350-TEMP module collects data on internal
temperatures at multiple locations of the distribution panel. It allows for the overall temperature control
of the distribution panel.
Users can check data on measured temperatures and set up events related to the temperatures on the
Accura 2350-TEMP module. Event alarms occur according to the settings, and users can check detailed
event data. Users can reset settings for external temperature events only on the Accura 2350-TEMP
module. However, for the events detected by the Accura TSEN device, users can reset event alarms only
with the RESET button on the Accura TSEN device.
For details about how to install Accura 2350-TEMP and connect it with Accura 2300[S] and Accura TSEN
devices, refer to
「
Chapter 1 Installation and Wiring > Step 1: Accura 2350-TEMP Installation
」
.
Device Composition
The device composition of the Accura 2350-TEMP module is as follows.
Fig 3.1 Accura 2350-TEMP Device Composition
Front
Rear
Summary of Contents for Accura 2350-TEMP
Page 1: ......
