background image

p5

SERVICE INSTRUCTIONS

Tools required for service:

•  Allen key (5 mm)

•  Allen key (6 mm)

•  Screwdriver (small)

 

1.  Remove screws (1).
2.  Remove self-tailing arm (2) and drum (4).
3.  Remove drive shaft (5) .
4.  Clean the balls (8, 9) with a rag.  

DO NOT remove the balls and the small retaining ring (7) above the balls.

5.  Remove screws (15).
6.  Remove upper base (10).
7.  Remove roller bearing (13).
8.  Remove shafts (16).
9.  Remove and dismantle the two gear units (17), (18).
10. Clean all parts in white spirits/mineral spirits. Remember to clean the gear teeth and  

ball track inside the drum (4).

11. Assemble in reverse order. During assemble, by the use of a small soft brush lightly grease 

all gear teeth, drive shaft, roller bearing, shafts, pawls, springs and bushings. Pawls should 

only be lubricated with a very thin film of ANDERSEN WINCH GREASE. It is very important 

that pawls can move freely.

 

IMPORTANT: 

When assembling the winch, check the functioning of each pawl by pushing the 

pawl against the spring. The pawls should move smoothly and automatically return to their 

normal position, where the pawls engage with the teeth. If the pawls do not function correctly, 

clean and lubricate the pawls and gears. Check the function of the pawls again to make sure 

that it works correctly. If the pawls do not work correctly replace the springs and recheck the 

functioning. 

Malfunctioning pawls may lead to unexpected release of the winch force resulting in fatal 

injuries to the user and others.

 

Service Kit No: 12 (part. no. 710012) contains spare parts for this winch.

 

Maintenance instructions for PVD coated stainless steel surfaces.

PVD-coated surfaces should be rinsed regularly in fresh water to remove any salt residue, dirt 

or other contaminants and dried gently with a soft cloth. To remove grease or other marks,  

a mild abrasive free cleaning agent such as spray-on glass cleaning solution may be used.  

No caustic detergents or other aggressive or abrasive cleaning agents  

should ever be used, as they may damage the surface.

•  Winch handle

•  ANDERSEN winch grease

58ST FS (V.2.0.F)

62ST FS (V.2.0.F)

Summary of Contents for Andersen 58ST FS









Reviews: