9
Locate tab
Fig. 4
Fig. 5
2. To remove disc, hold disc away
and place thumbs underneath disc
at top of disc marked ‘push up’
and push out (see Fig. 6). The disc
may be tight for the first few times.
Fig. 6
Using The Processing Blade/
Discs
Fig. 3
Using the Processing/
Mixing Blade
1. Select either the processing or
plastic mixing blade.
2. Place the processing/mixing blade
over the drive shaft and push down
(see Fig. 3).
Using the Slicing/
Grating Discs
1. Select the desired slicing/grating
disc and assemble into the disc
holder (see Fig. 4). To fit the stainless
steel disc onto disc holder, fit left
side of disc (when writing is towards
you), with locating tab into holder,
then push right side down firmly
until it locks into place (see Fig. 5).
Fit the end without the push up
marking in first. Then push the ‘push
up’ side down firmly until it locks
into place.
Summary of Contents for RFP200
