RONK Automatic Transfer Switch Owner’s Manual
5
INTRODUCTION
Thank you for your purchase of a RONK Automatic Transfer
Switch (ATS). This product is designed for use with standby
generators. When operated and maintained according to the
instructions in this manual, your system will provide many years
of standby electrical energy service.
This manual contains important safety instructions for
installation and operation of this ATS. We have made every
effort to provide safe, efficient instructions for installation
and operation. However, as every installation is unique, it is
impossible to anticipate every possible procedure and method
to obtain a properly installed unit. It is important that you read
and understand these instructions thoroughly before attempting
to install or operate this unit. Your equipment is supplied with
this combined Installation and User Manual. This is an important
document and should be retained by the owner after the
installation has been completed.
This ATS requires professional installation before use. Refer
to the installation section of this manual for instructions on
installation procedures. Only licensed electrical contractors
should install an ATS. Installations must comply completely with
all federal, state and local codes, standards and regulations. Your
installer should follow these instructions completely. Every effort
has been made to ensure that the information in this manual is
both accurate and current. However, the manufacturer reserves
the right to change, alter or otherwise improve the system at any
time without prior notice.
CONTACT INFORMATION
There are several ways to contact us for answers to questions
you may have about your product. Contact Technical Services by
phone at 1-217-563-8333 Monday through Friday 8 AM to 4:30
PM Central Time or email [email protected].
For your future reference, record the following pertinent
information. This information will help to identify product
information should you need to contact RONK’s Technical
Services department.
ATS
Model Number:
Description:
Serial Number:
Installation Date:
GENERATOR
Model Number:
Description:
Serial Number:
Installation Date:
NOTICE
Please check with the generator manufacturer to ensure the
RONK ATS switch is compatible.
Summary of Contents for 100-600 AMP
Page 1: ...OWNER S INSTALLATION MANUAL 100 600 AMP RONK Automatic Transfer Switch...
Page 30: ...30 RONK Automatic Transfer Switch Owner s Manual NOTES...
Page 31: ...RONK Automatic Transfer Switch Owner s Manual 31...
Page 32: ...106 E State Street Nokomis IL 62075 800 221 7665 www ronkelectrical com...
