RONK Automatic Transfer Switch Owner’s Manual
23
MAINTENANCE
RECOMMENDED MAINTENANCE
Periodically inspect all terminals (load, line and control) and all
fasteners for any loose parts or wiring.
Periodically inspect all terminals (load, line and control) and all
fasteners for tightness.
Test the transfer switch operation upon initial installation.
Periodically check for any excessive wear on any mechanical
operating parts or wiring connections. Clean or replace parts
when necessary.
All transfer switch parts are made of corrosion-resistant material
or are plated, coated or painted for corrosion protection.
!
WARNING
Always isolate the transfer switch from all
possible power sources when performing
maintenance on the mechanism.
PROCEDURE
ACTION
Make the transfer switch safe for inspection and maintenance
Disconnect all possible power sources before switch inspection.
Inspect the transfer switch location for possible safety hazards
Inspect mounting location for any safety or fire hazards. Inspect for dirt,
wiring damage and mechanical damage.
Inspect the transfer switch for loose hardware
Check all hardware including controller, terminals, etc. for any looseness due
to vibrations, etc.
Check for any overheating due to loose connections
Check for any discoloration, melting or blistering of wiring or connections.
Perform regular testing of the transfer switch
Perform regular testing of the switch to check for proper operation in case of
emergency.
MAINTENANCE
Always maintain a 3 feet (92 cm) clearance around the transfer
switch. Once a month, visually inspect the outside of the switch
for accumulation of dirt, moisture and/or corrosion on the
enclosure.
The homeowner or end user is responsible for following all
maintenance and periodic testing procedures and guidelines of
the generator owner’s manual to ensure proper operation.
Once a year, have a licensed electrician clean the inside of the
switch and inspect for:
• Damage or loose parts
• Discoloration of wire insulation or components
Table 7
Summary of Contents for 100-600 AMP
Page 1: ...OWNER S INSTALLATION MANUAL 100 600 AMP RONK Automatic Transfer Switch...
Page 30: ...30 RONK Automatic Transfer Switch Owner s Manual NOTES...
Page 31: ...RONK Automatic Transfer Switch Owner s Manual 31...
Page 32: ...106 E State Street Nokomis IL 62075 800 221 7665 www ronkelectrical com...
