23
Problem
Possible reason
Solution
The display shows a square-
shaped running line. The drink
isn’t poured into the cup after
you press «Exit» (20) button.
The water tank is installed
improperly
Fill the water tank and place it in the socket behind the
coffee machine left door, press on it until bumping
Water does not get in the water
supply pipe
Contact the service center
The water supply pipe is
blocked
Contact the service center
Coffee is brewed too weak
(watery)
The grind is too fine
Adjust the grinding by setting it to less fine grind
Dark roasted coffee is used for
preparing drinks, the beans
release a greater amount of cof-
fee oil, the coffee grinder knives
stick together, the beans do not
enter the coffee machine
During the coffee maker operation turn the control knob
to the direction of «+». If the problem remains, contact the
service center
Wet coffee has blocked the
coffee maker operation
Remove the wet beans, clean the coffee grinder according
to these instructions, add dry coffee beans
Coffee is not poured into the cup The water tank is installed
improperly
Fill the water tank and place it in the socket behind the
coffee machine left door, press on it until bumping
The coffee spout (12) is
clogged
Clean the coffee spout (2) thoroughly with a damp cloth
and supplied brush
The water pipes for brewing
coffee are clogged
Perform the decalcination following this guide. If the
problem remains, contact the service center
When you switch the coffee ma-
chine on for the first time or after
a long period of storage, it grinds
coffee but does not brew a drink
An air lock has formed in the
brewing system
Place an empty container under the cappuccinator pipe
and switch the steam mode on, wait until the system starts
to deliver steam evenly. It may take 2-3 minutes.
ATTENTION! Do not put your hands under the operating
cappuccinator pipe to avoid burns!
STORAGE
– Before taking the unit away for storage, unplug it and let
the unit cool down completely.
– Clean the unit. Wash all removable parts (1, 3, 4, 9, 12,
13) with warm water and neutral detergent and dry them.
– Do not leave, use and keep the unit in places with the
temperature below 0°C.
– Keep the unit in a dry cool place out of reach of children
and handicapped persons.
TRANSPORTATION
– Keep the original packaging of the coffee machine for
safe transportation.
– Remove all water from the tank of the coffee machine
and its internal parts, wipe dry with a soft cloth.
DELIVERY SET
Coffee Machine – 1 pc.
Measuring spoon for coffee (for 5 g) – 1 pc.
Metal brush for cleaning
the milk supply system – 1 pc.
Soft brush for cleaning the brewing unit – 1 pc.
A set of spare silicone rings for the brewing unit – 1 pc.
Instruction manual – 1 pc.
Warranty certificate – 1 pc.
TECHNICAL SPECIFICATIONS
Power supply: 220-240 V ~ 50 Hz
Rated input power: 1100-1300 W
Water tank capacity: 1,6 L
Summary of Contents for RDE-1109
