22
Problem
Possible reason
Solution
The coffee grinder is making
odd noises
The coffee grinder is clogged
Clean the coffee grinder according to this guide
There are foreign objects
caught up in the coffee grinder
Unplug the coffee machine, remove foreign objects from
the grinder, clean it with a dry cloth
The coffee grinder doesn’t work
The coffee grinder motor is
damaged
Contact the service center
There are foreign objects
caught up in the coffee grinder
Unplug the coffee machine, remove foreign objects from
the grinder, clean it with a dry cloth
Liquid is slowly leaking from the
coffee spout
The grind is too fine
Adjust the coffee grinder to a coarser grind
Low water in the brewing unit
Press the «Hot water» button in the coffee machine menu
first before making coffee
The brewing unit is clogged up Clean the brewing unit
Instead of coffee water drips
from the coffee supply block
Coffee beans are not suffi-
ciently ground
Adjust the coffee grinder settings to increase the grinding
degree
Coffee beans are wet
Replace the coffee beans with well-dried ones
The display of the coffee ma-
chine shows a message that the
brewing unit is missing, although
it is installed in the unit body
The brewing unit has been
inserted incorrectly
Check the brewing unit and reinsert it in accordance with
this guide
The coffee spout produces too
little coffee
The water supply system is
clogged with the residual scales
Descale the coffee machine in accordance with this guide
The milk is not frothing
The milk frother is clogged
Fully clean the milk system and milk tubes.
This type of milk is not suitable
for frothing
For best results, use whole milk
The display of the coffee ma-
chine shows a message that the
used coffee grounds container
is missing
The used coffee grounds
container installing sensor is
clogged or the container is not
installed
Remove the used coffee grounds container and thorough-
ly clean all corners of the container area with the soft brush
supplied with the unit, and clean all outer corners of the
container with a dry cloth
The coffee maker display shows
the message that the used coffee
grounds container is not installed,
though it is installed to its place
The coffee grounds container
sensor is blocked
Remove the used coffee grounds container and thorough-
ly clean all corners of the container area with the soft brush
supplied with the unit, and clean all outer corners of the
container with a dry cloth.
The display shows the icon
«Water tank»
The water tank is empty
Fill the tank with clean water and place it in the slot behind
the left door of the coffee machine, press until it clicks
The water level sensor requires
calibration
While the coffee maker is in the standby mode, perform
the following actions: 1) Remove the water tank from the
coffee machine slot; 2) Remove the sticker from the water
level sensor reset button, located in the corner of the water
tank slot; 3) Press the button (22) for more than 6 seconds;
4) Unplug the coffee machine; 5) Plug the coffee machine
in and wait 10 seconds; 6) Fill the water tank and place it in
the slot behind the left door of the coffee machine, press
on it until bumping
Summary of Contents for RDE-1109
