RONDELL RDE-1105, Manual

Page: 8 / 32

8
ENGLISH
FUNCTIONALITY AND OPERATION
Making coffee, hot water and steam function
Fill the water tank (9) with clean water, the water level should
not exceed the position «MAX».
Connect the coffee machine to the mains and press the on/
off (21) button
(make sure that the steam switch (5) is in
the position «
˜
»), after that the machine will switch to the pre-
heating mode.
The function buttons (21, 22, 23, 24) are the corresponding
indicators, and there are two function indicators (25, 26) on
the left and right sides of the control panel. The indicators in
various states show various operation modes of the coffee
machine. The coffee, hot water and steam functions cannot
work at the same time, only one function can work at a time.
Heating
Press the button (21) «
» once, the whole machine will switch
to the preheating mode, the buttons (21) and (22) indi-
cators will flash at first, and then they will simultaneously glow
constantly.
Standby
When the coffee machine warms up, it will switch to the
standby mode. During this time, the on/off button (21)
the grinding buttons (22) , the one cup button (23) and
the two cups button (24) glow constantly and the coffee
machine can be used in a normal mode.
Making one cup of coffee
Place the filter for one cup (15) into the holder (6), add about
13 grams of ground coffee, use the coffee tamper (17) to
tamp it down firmly, then align and insert the holder (6) into
the coffee machine like this (pic. 1, 2, 3), turn the holder (6)
counterclockwise to fix it. Put a cup on the tray (11), press
the button (23)
, and the machine will start making the
selected amount of coffee. When the required amount is
ready, the machine will automatically switch off and go into
standby mode.
Making two cups of coffee
Place the filter for two cups (14) into the holder (6), add about
19 grams of ground coffee, use the coffee tamper (17) to
tamp it down firmly, then align and insert the holder (6) into
the coffee machine like this (pic. 1, 2, 3), turn the holder (6)
counterclockwise to fix it. Put a cup on the tray (11), press
the button (24)
, and the machine will start making the
selected amount of coffee. When the required amount is
ready, the machine will automatically switch off and go into
standby mode.
Individual settings
You can customize your portion of coffee according to your
needs.
Press and hold the button (23) «
» or the button (24) « »
until the indicator corresponding to the buttons starts flashing
on the control panel and the drink starts to be dispensed. When
the coffee portion has reached the desired amount, press one
of the selected buttons (23 or 24), coffee will stop dispensing,
you will hear a sound signal and the machine will remember the
coffee portion. The next time you make coffee, the machine will
brew the required amount of coffee according to your settings
(the adjustable amount of coffee is between 20 and 400 ml).
To restore the default settings of one portion of coffee, press
and hold the buttons (21, 23 and 24) simultaneously until you
hear a sound signal.
When making coffee, make sure that the holder (6) is inserted
and turned counterclockwise to the correct position (pic. 1, 2, 3).
Making hot water
Turn the steam/water switch (5) towards the icon
(pic. 10),
the coffee machine switches to the «hot water» mode, and the
steam/hot water indicator (25) on the control panel (4) first
starts blinking and then glows constantly, the buttons (21 and
22) indicators will be glowing until the buttons (23 and 24) indi-
cators go out. The steam release pipe (7) will dispense hot
water. Turn the steam/water switch (5) to the position «
˜ », and
the coffee machine will stop dispensing hot water and switch to
the standby mode.
Note: The maximum water consumption when using the hot
water function is 180-220 ml.
Heating and steam supply
Turn the steam/water switch (5) towards the icon
(pic. 10),
the coffee machine switches to the «steam supply» mode, and
the steam/hot water indicator (25) on the control panel (4) first
starts blinking and then glows constantly. The buttons (21 and
22) indicators will glow constantly and the buttons (23 and 24)
indicators will go out.
The steam release pipe (7) will release saturated steam. Turn
the steam/water switch (5) to the position «°C», and the coffee
machine will stop dispensing steam and switch to the standby
mode. Other functions will not be available.
Attention! When using the steam function, the coffee machine
produces steam at a high temperature, take care not to burn
yourself when using it.
Milk frothing
To ensure good frothing of the milk, wait 3-5 seconds for
steam to come out, then turn the knob to the position «
˜
», put