Romstal SM ECO 25, Instructions For Use, Maintenance And Installation Manual

Page: 40 / 56

40
If you want to check or set boiler temperature, press the Enter key and the
display begins to flashes. Then use buttons to change values and input new
temperature. Be sure to confirm the value with the ENTER key.
Next pressing RIGHT arrives at
an indication for you to choose the type
of pellet. This option allows us to adapt
the boiler to the quality of pellets. There
are modes for three types of pellets. By
touching ENTER
button this value on
the display flashes, by adjusting with
buttons
changing the value or mode of
operation of the boiler according to the
quality of pellets.
When you change these values, it is necessary to take care of the burning of the
pellets, the rest amount of ash in the burner. If mode is appropriate, the boiler will work
without problems. If not, there is possibility of increased consumption, periodic
shutdowns of the boiler, large amount of ash etc.
Next menu with an indication
(Clock) is used to set the time and date of
the regulation. By touching ENTER
the hour value start to flashes. Changing
the value of an hour is changing by
buttons
on regulation. Once you are
inside of time menu you can navigate to
the right with button RIGHT
to change
time and date by navigating with buttons
.Once you changed all needed you
need to confirm it with only once touching
button ENTER
.
Continue with button RIGHT and
you will see a change in the value of the
date. The same procedure of changing
values as well as for time setting.