![Romstal SM ECO 25 Instructions For Use, Maintenance And Installation Manual Download Page 25](http://html.mh-extra.com/html/romstal/sm-eco-25/sm-eco-25_instructions-for-use-maintenance-and-installation-manual_1484659025.webp)
25
They need to be cleaned manually with a special key for every 150-180 kg of spent pellets (two full tank
of pellet). First use the key to lift up small round lids with openings, two of them, that are located on the
cover of the stove at the top. Using the same key go into the openings of the lever - the pins which are
connected to the cleaning levers, and dust them a few times by lifting them up and putting them down, as
shown in Figure 19.
Figure 19. Cleaning the turbulators on boiler
Clean the boiler only when it is cold. At the end of the cleaning, push the button all the way back (pull it)
so that you can see the button and the bar of the cleaning mechanism.
-GLASS EYE (check and clean periodically):
Make sure the stove and the ash are cool.
Clean the glass with a soft cloth. Glass is made from pyrocheramics resistant to high temperatures. In
case of damage, before re-using the stove, replace the glass. The glass must be replaced only by the
authorized persons.
Smoke exhaust fan area should be checked and cleaned every six months.
Make sure the stove and the ash are cool.
Cleaning the interior flue exhaust is done by first removing the cover on the bottom of the box for the
ashes and inserting the vacuum cleaner hose through that hole, as to vacuum out the remaining ashes
Figure 22.
- GENERAL CLEANING AT THE END OF THE HEATING SEASON
Make sure the stove and the ash are cool - unplug the boiler from the power supply.
At the end of the heating season, to be safe, unplug the boiler from the power supply. It is important to
clean and check the boiler, as explained in the above points.
Make sure the boiler and the ash are cold.
After prolonged use, it is possible that the sealing tape for sealing the door separates. This sealing tape
sticks to the door with silicone resistant to high temperatures. To resolve this, tape the back of it using an
adhesive that is resistant to high temperatures. This is very important for good sealing of the doors.
Summary of Contents for SM ECO 25
