Copyright ROMPA® Ltd
GYMTOP® USB PROFESSIONAL 20143, KH 2.10
GYMTOP® USB PROFESSIONAL 20143
CONTENTS
1 x Gymtop®
USB
1 x CD
Please note
: please see PC requirements below.
ABOUT THIS PRODUCT
•
Can help develop users’ motor skills including planning
•
Gymtop® uses proprioceptors (kinaesthetic analysers for movement control), as well as
optical, acoustic and tactile awareness
•
The GYMTOP® can support up to 120kg
REQUIREMENTS
Processor: Pentium II 500 or faster
RAM: 128 MB
Hard drive: 100 MB ava 1MB per exercise
Operating System: Windows 2000, Windows XP, Windows Vista
DirectX8 or higher
CD-ROM Drive
One free USB port
User account with full access rights (main user or administrator)
OPTIONAL REQUIREMENTS
4 Port USB Hub
USB Extension cable 2.5m
Non-slip mat (ROMPA® code: 20144)
CONNECTION OF GYMTOP® TO PC
1.
Before you connect the USB plug of the Gymtop® to the USB port of your PC, you must
first install the driver (
software first, Gymtop®
next
).
2.
Once the driver has been installed, connect the USB plug to your PC. After a few
seconds the equipment is ready to use. If all USB ports of your PC are in use, use an
appropriate 4 Port USB hub (not included).
PROGRAM INSTALLATION
Once you are sure that your PC fulfils the minimum software requirements, install the software:
1. Put the CD-ROM in your CD-drive.
