18
Note:
All detachable accessory parts may also be cleaned in the dishwasher at low temperature and in the upper
dish rack. However, we recommend to clean the special cutter by hand as the blades may become blunt in the
dishwasher after a while.
Tip:
For food rich in natural dyes (e. g. carrots), seals and plastic parts of the accessory may change colour. Wipe
these parts down with a few drops of cooking oil before cleaning them.
• Clean the appliance immediately after use so that residues do not dry on.
• Remove all detachable parts from the motor unit.
• Clean the outside of the motor unit with a damp tissue and wipe it dry.
• Clean all accessory parts using hot water with some mild detergent. For cleaning of the special cutter,
use a conventional household cleaning brush.
• Prior to the next use, all accessory parts have to be completely dry.
• Do not use any abrasives or solvents!
• Never use a steam jet appliance for cleaning!
IMPORTANT:
For storage and protection against injuries, we recommend
placing both protective blade covers over the special cutter.
Cleaning and maintenance
Attention: Hazard of injury!
• Always unplug the appliance before cleaning!
• Never immerse the base unit, power cord and the mains plug
in water or clean them under running water!
• When disassembling, assembling or cleaning, do not reach
into the sharp blades of the 4-blade special cutter with your
hands! Hold the cutter at the top of the shaft only!
• Handle the special cutter with care to avoid injuries!
