background image

17

3.) How to fill the glass bowl

CAUTION:
Before removing the motor unit, make sure the power plug is  
disconnected from the socket!

Do not accidently hold down the switch-ON button!  

•  Remove the motor unit and the working cover.
•  Insert the special cutter. For bigger quantities we recommend to use all 4 cutting blades. For small quantities 
  you can disassemble the blade and work with only 2 cutting blades.
•  Fill the glass bowl with food. Pay attention to the maximum filling quantity (MZ 400: 1.0 l – MZ 500: 1.5 l).
•  Then put on the working cover and the motor unit. Make sure that the appliance has been correctly and 
  properly assembled and that the glass bowl is standing on the anti-slip mat.

4.) How to start/stop the appliance

•  Pay attention to a safe position of the working cover and only operate the appliance if the working cover is 
  tightly closed!
•  Before connecting the power plug to a socket, make sure that you do not accidently hold down the ON button!
•  To start the appliance, press the ON button and hold it down for operation. When releasing the ON button,  
  the appliance stops.
•  Depending on the material to be crushed, you can chose between permanent operation (hold the ON button 
  permanently down) and interval operation (press the ON button for 2 – 3 seconds, then 2 – 3 seconds pause, 
  repeat several times). 
 

Caution: 

Do not let the motor run for more than 20 seconds without interruption!

•  Release the ON button for switching off the appliance. Upon completion of the crashing process and before  
  taking off the motor unit, always disconnect the power plug from the socket!

5.) How to empty the glass bowl

CAUTION:
Before removing the motor unit, pay attention that the power plug is 
disconnected from the socket!

Do not accidently hold down the switch-ON button!  

•  Remove the motor unit and the working cover (see point “How to disassemble the appliance”).
•  Carefully remove special cutter and foods from the glass bowl. 

6.) How to switch off the appliance permanently

•  For a safe switch off, pull the power plug after every use! 

Summary of Contents for MZ 400





















Reviews: