14
Safety advices for using the appliance
Caution: Hazard of injury!
• Before replacing accessories or accessories parts that are
moving during operation, the device must be switched off and
disconnected from the power socket!
• When disassembling, assembling or cleaning do not reach into
the sharp blades of the 4-bladed special cutter! Only touch the
blades at the top of the shaft!
• Handle the special cutter with care to avoid injuries!
• The appliance has a delayed motor stop after it has been
switched off. Therefore only remove motor unit and working
cover after complete standstill!
• The appliance is not suitable for processing deep-frozen or too hard foods.
• Do not operate the appliance outdoors or near sources of heat (oven, gas flame
etc.) or in explosive environments, where inflammable liquids or gases are
located.
• Place the base unit and the special cutter beyond children’s reach.
• Always unplug the appliance from the power socket if it is not supervised and
prior to assembly, disassembly, cleaning or non-use.
• During operation, do not stir in glass bowl with objects and never reach into the
running special cutter. To avoid injuries it is imperative to keep away your hair,
hands and clothes from the running appliance.
• Avoid any no-load operation. Do not handle the appliance with wet hands!
• Never immerse the appliance, the power cord and the plug into water for
cleaning.
• Do not store the appliance outside or in wet rooms.
• Use original accessory parts only.
• Pull the power plug after each use for safe switch-off.
Prior to initial use
For a start, please clean the appliance as well as all accessory parts. For more detailed information please refer to
chapter “Cleaning and maintenance”.
Integrated safety system
The appliance is equipped with a safety system. A micro switch ensures that the appliance does only function, if
the motor unit is correctly placed on the working cover. Additionally, a spring mechanism on the motor coupling
protects against improper operation. This and the observance of this instruction manual, ensure a safe operation.
