21
• Use original accessory parts only.
• Do not use the appliance as space heater.
• Observe the following when setting up the appliance:
° Place the appliance with its rear to the wall. Leave a ventilation distance of 4 cm.
° Place the appliance on a heat-resistant, stable and even surface (no varnished
surfaces, no tablecloths etc.).
° Place it beyond children’s reach.
° Leave a ventilation distance of at least 4 cm to all sides and 1 m above
the appliance to avoid damage by heat or fat splatters and to grant an
unobstructed work area. Unhindered air supply has to be ensured.
° Do not operate the appliance near of sources of heat (oven, gas flame etc.)
or in explosive environments, where inflammable liquids or gases are located.
°
Caution! Hazard of fire!
This appliance is not qualified for installation.
• Pull the power plug after each use for safe switch-off.
Prior to initial use
For a start, please clean the appliance as well as all accessory parts. For information that is more detailed
please refer to chapter “Cleaning and maintenance”.
Moreover, it is necessary to heat up the heating
elements for a short time to ensure the proper functioning.
Initial heating-up of the oven:
• Please clean all removable accessory parts in warm water with some dishwashing detergent.
• Prior to initial use, heat up the oven chamber for about 15 minutes with setting “upper and lower heat
with circulating air” at maximum temperature (230 °C) in order to burn in the protective coating of the
heating elements.
• After the appliance has cooled down, clean the interior oven with a moist cloth.
NOTE: Please do not be bothered by the slight, harmless smoke and smell that occurs for a short
while when starting the appliance for the first time. Make sure that the room is well-aerated
during this time.
Operating the appliance
CAUTION: Hazard of injury and burns!
• Prior to operation, ensure that the crumb tray is inserted
below the lower heating element!
• Surfaces of the casing and accessory parts are getting hot
during use!
• Hot surfaces firstly stay hot after switch-off!
• Make sure the food touches neither the upper, nor the lower
heating rod when inserting it!
