background image

20

–  Unplug the machine from the power socket when it is not going to be used for a

prolonged period.

–  Unplug the machine by pulling from the plug rather than the power cable so that you do

not damage it.

–  Before cleaning and maintaining your machine, unplug it from the power socket and let it

cool down.

–  Never touch the power cable with wet hands.

–  Do not immerse the machine, either as a whole or in part, in water or any other liquids.

–  Never place the machine or any part of it in a dishwasher.

–  Together, electricity and water are dangerous and may cause fatal electric shocks.

–  Do not open the machine. Internal voltage dangerous.

–  Do not place anything in the openings. This could cause a fire or electric shock.

–  Unplug the machine and let it cool down before cleaning it. To clean the waste collector,

water reservoir, drainage plate, grille and percolator, use water and a mild detergent.

–  Do not use the machine for any purpose other than those for which it is intended. Misusing

the machine may cause injury.

–  The surface of the element will remain hot for a certain length of time after use. Do not

touch hot surfaces. Use the levers or buttons provided.

– Avoid water drop in the connector of the machine’s plug.

–  When machine is equipped with the optional network valve: the machine is targeted to

be permanently connected to the water network, under a pressure of minimum 20 000Pa

( 0.2 bar ) and maximum 50 000 Pa ( 0.5 bar ).

Summary of Contents for Xpress Office










Reviews: