22
Hot water
Expresso
Coffee
Long coffee
Service button
in prog. mode :
Minus value ( - )
in prog. mode :
Plus value ( + )
in prog. mode :
Selection validation
When this button
only is lighten, error
mode ( see display for
identification of error )
in prog mode:
Back to upper menu
This appliance disposal should not be done in the common trash, but on the
Electronic/Electrical trash for recycling proper locations.
2 – Machine description
3 – unpacking and coMMissioning the Machine
3.1 – unpacking
– Lift the machine, taking the necessary precautions and remove the protective plastic cover.
– Make sure that you do not lose any components or manuals provided with the machine.
3.2 – coMMissioning
Put the machine in an appropriate location ( flat and horizontal area, dry and clean place, between
5°C and 35°C ) and leave at least 10 cm from the rear panel.
– Make sure that the elements ( Covers, Waste pod Bin, Water Tank ) are correctly in place.
– Fill the Water Tank.
– Connect the machine to the 230V electrical network.
– When the machine starts up, the screen indicates: «Heating»
– When the machine is ready, the digital screen indicates: «Select your drink» ( the 5 buttons stay
on ).
– Before you drink your first coffee, rinse the machine as follows:
– Run 3 hot water cycles ( do not drink the hot water ). See chapter 4 for the hot water function.
– Run 3 long coffee cycles ( do not drink the coffee ). See chapter 4 for the long coffee function.
4 – macHInE functIons
4.1 – control pad
1 – Top cover
2 – Water Tank
3 – Digital screen
4 – Selection key
5 – Waste Pod Bin
6 – Coffee exit spout / Hot
water
7 – Cup Support
8 – Drip tray
9 – On/off switch
10 – Electrical socket
11 – Water Tank Cover