Operating and Maintenance Manual
6 |
P a g e
D e c a p p e r O & M M a n u a l R e v D
➢
What is supplied with the Decapper?
The Decapper will generally be supplied with the following components in
addition to the drop tubes and additional spares purchased with your
Decapper.
1.
Your Decapper is supplied with a custom FW Arms Decapper
Assembly. You will need to install and adjust the Decapper as
detailed in the supplied instructions from FW Arms AND the process
described in this manual.
2.
The following is supplied with the Decapper as standard
a.
This manual. Updated manuals are available online.
b.
1 set of self-aligning
“pegs”
and spare spring.
c.
Length of 15mm
(5/8”)
ID vinyl feed hose with a Dillon
casefeeder adaptor fitted on one end and a cable tie for the
drop tube on the other end. This is called the feed hose.
d.
Length of 15mm (
5/8’) ID Vinyl hose
to be used to control
the cases feeding into a bucket (or similar) and for primer
removal. The customer can cut the hose to suit.
e.
Universal Power supply suitable for 100VAC to 277VAC
supplies. The power supply brick is supplied to the market
with an Australian power plug and depending on your
location a plug adaptor. You may need to purchase a plug
adaptor to suit your location. These are available from most
electronic and travel stores.
3.
You will need additional parts to operate the Decapper, and these
include spare decapping pins and drop tubes. The spare pins are a
recommended spare and drop tubes are calibre sensitive and should
be ordered with the machine at the time of purchase. If you did not
order these, you WILL need them before your machine will process
cases.
