Operating and Maintenance Manual
24 |
P a g e
D e c a p p e r O & M M a n u a l R e v D
Very hard to say, it will depend upon the degree of soiling / dirt on the cases.
The plastic material is a high end engineered material and is VERY hard
wearing (
it’s
used as a chute liner for abrasive materials). It will eventually
wear out as expected, but we have supplied a spare. Replacements are
available online via the Rollsizer.com website.
From November 2022, a modified peg set was released The part number is
RLS-DCPegset-R and is available via the parts section on the Rollsizer.com
website.
This part will be rolled out progressively in machines but it will take time for
these to be standard fitment to machines.
❖
What does this do? The new pegset has been designed
primarily for the 223 cases too improve case stability. The
photograph below shows the slight difference that allows
the pegs to close faster.
The new wear
plates have a 6mm
wide x 3mm deep
slot on the wear
plate.
This slot will reduce
the tendency for
stretched primers to
stop the cases from
tipping cases over.