Rollei ROLLEIFLEX 6008 AF, Manual

Page: 29 / 112

..............................................................................
..............................................................................
29
Note:
At subzero temperatures it is not advisable
to preload the fi lm inserts. Instead, it is
preferable to load the fi lm directly from
its box and advance it to frame 1. Due to
the cold, the glue holding the fi lm on the
paper leader will get brittle and might give
rise to fi lm-advance problems.
LOADING FILM INSERTS
57
29
35 c
Loading fi lm inserts
Open the magazine back as described
before and load the insert so that the fi lm
spool coincides with the icon , the
empty spool with . Do not try to
insert the fi lm edges beneath the spring
clips
c . Simply leave them on top. As the
fi lm is wound on automatically, it will pass
below the clips on its own.
Close the back until it engages and pull
the grip fully down to cancel the release
lock. Set the master switch to “S“ and
briefl y press shutter release
20 or 24 : The
fi lm will automatically advance to the fi rst
frame, and the frame counter
51 will read
“1“. Should this not be the case – which
does happen from time to time with cer-
tain makes of fi lm –, press the shutter
release once more.