..............................................................................
..............................................................................
28
Loading and changing fi lm inserts
Pull the grip of the magazine‘s laminar
drawslide
49
all the way in the direction
of the arrow “magazine change/remove
insert“. Press release buttons
34
and
48
, swing the magazine back down and
remove fi lm insert
57
. The recesses in the
back make removal very easy. If necessary,
briefl y press the empty spool with one
fi nger to loosen the insert.
Pull red tab
55
outwards, insert the fi lm
spool according to icon
58
(black side
of paper facing inside) and engage the
tab. Thread the fi lm leader straight into
empty spool
28
and use advance fl ange
59
to wind it up tight until the arrow on
the paper backing is properly aligned with
index
29
. Slip the fi lm-box tab into memo
holder
56
(on side of fi lm spool).
The camera comes with a fi lm insert
inside. Unless you use interchangeable
magazines, which are even more practical,
it is advisable to keep several fi lm inserts
ready for prolonged shoots. The inserts
can be preloaded and are easy to carry.
The same type of insert can be used for
size 120 and 220 roll fi lm (not the same
type of magazine, though!).
The empty fi lm spool from the last roll
need not be changed – it will accept the
leader of the new fi lm without reposition-
ing. This is a special benefi t of the sym-
metrical insert that fi ts the fi lm-advance
system even when it is turned through
180°. If the new fi lm is of different speed
or type, also change the fi lm tab in the
memo holder, and reset the fi lm speed on
dial
37
.
LOADING AND CHANGING FILM INSERTS
29
56
55
58
28
57
59
Summary of Contents for ROLLEIFLEX 6008 AF
Page 1: ... 1 Rolleiflex 6008 AF Rolleiflex 6008 integral2 User s Manual ...
Page 2: ... 2 ...
Page 110: ... 110 NOTES ...
Page 111: ... 111 ...
