..............................................................................
..............................................................................
30
Removing the fi lm
After the last frame, wait for the fi lm
advance and wind-up to fi nish and “End“
to appear in the display. Then close the
laminar drawslide (grip in direction of
arrow “magazine change/remove insert“).
Open the magazine back, remove the
insert and take out the fi lm. If necessary,
replace the fi lm insert and close the
back until it engages. It is advisable to
remove the magazine from the camera
before removing the fi lm. (See paragraph
“Removing/changing magazines“.)
Note:
Before opening the magazine back
35
,
pull grip
49
fully in the direction of the
arrow “magazine change/remove insert“,
or the drawslide may be damaged!
Setting the fi lm speed
Engage dial
37
in the position for the ISO
speed concerned. The dial must be in one
of its click stops!
Film speed can be set over a range of ISO
25/15° to 6400/39°, which covers prac-
tically all the emulsions available in the
world.
If the fi lm speed is changed with the
camera switched on (!) or if magazines
with different ISO settings are attached to
the camera, the corresponding ISO value
will be displayed for about one second,
e.g. 25 – 32 – 40 … 4000 – 5000 – 6400,
preceded by “Sn“ (for sensitivity).
REMOVING THE FILM
35
48
57
34
37
Summary of Contents for ROLLEIFLEX 6008 AF
Page 1: ... 1 Rolleiflex 6008 AF Rolleiflex 6008 integral2 User s Manual ...
Page 2: ... 2 ...
Page 110: ... 110 NOTES ...
Page 111: ... 111 ...
