..............................................................................
..............................................................................
52
Mirror lockup
Camera shake is a major problem above
all with long-focus lenses and in close-up
work. A suitable remedy is mirror lockup.
To do this, briefl y press knob
73
“mirror“:
The refl ex mirror will swing up; then press
the shutter release. The release lag is just a
few milliseconds.
If there was no previous AE lock – by lock-
ing memo button
27
or multi-spot meter-
ing –, the exposure value determined at
the instant of mirror lockup will be put in
memory.
After mirror lockup, the camera will
remain active for an additional four min-
utes. Be sure not to make any exposure
adjustment after mirror lockup because
the exposure meter is then inactive. The
measured values are put in memory if
the camera is switched off via the master
switch or if it turns off on its own.
If no further exposure is desired with
mirror lockup: Set multi-exposure knob
45
to “ME“ (fi lm advance disengaged) and
trigger the camera with its lens capped.
The refl ex mirror will swing down again,
and no frame will be lost. Then reset
knob
45
to “SE“.
Note:
In the case of the type 4560 magazine,
fi lm advance is engaged or disengaged
directly on the magazine. See Operating
Instructions of magazine.
MIRROR LOCKUP
73
45
Summary of Contents for ROLLEIFLEX 6008 AF
Page 1: ... 1 Rolleiflex 6008 AF Rolleiflex 6008 integral2 User s Manual ...
Page 2: ... 2 ...
Page 110: ... 110 NOTES ...
Page 111: ... 111 ...
