Connecting External Equipment
(AV OUT Jack)
12
Connecting to a PC
13
You can view videos and pictures saved in the unit through a TV or PC monitor
by connecting the AV OUT jack of the product.
Viewing Video/Music/Voice through the TV
1. Connect the AV cable plug to the AV OUT jack of the unit and the three RCA plugs to the
External TV In jacks. (Yellow: Video, White: Audio (Left), Red: Audio (Right))
2. Switch to Video (External In) Mode using the TV remote control so that the
signal from the PMP is selected.
● The Operating Display appears on the monitor.
● For more information on how to view video files, refer to page 24.
3. When playing the file ends, adjust the TV volume with the TV remote control.
Viewing a Picture through the TV
1. Connect the AV cable jack to the AV OUT jack of the unit, and the yellow jack of the three RCA
plugs to the yellow jack of the External TV In jacks. (Yellow: Video)
2. Switch to Video (External In) Mode using the TV remote control so that the signal from
the PMP is selected.
3. Play a picture file to view it.
● For more information on how to view picture files, refer to page 24, 45~47.
Watching a video/music/voice file
Viewing a photo file
Connecting to a PC using the USB cable
Procedures to Check the USB Driver
● Windows 98/ME:
Control Panel → System → Device Manager → Disk Drive →
USB 2.0 Storage Devic/USB 2.0 Storage Device USB Device
● Windows 2000 (Professional):
Control Panel → System → Hardware → Device Manager →
Disk Drive → USB 2.0 Storage Device USB Device
● Windows XP (Professional):
Control Panel → System → Hardware → Device Manager →
Disk Drive → USB 2.0 Storage Device USB Device
☞
Note
●
If your PC monitor has a Composite Input jack, you can view video or pictures through the PC monitor.
1
Connect the DC adapter to the main body and switch it on.
● Since operating the unit in connection with a PC consumes more power than
during normal operation and insufficient unit power may cause data loss, you
need to connect the unit to the DC adapter.
2
Open the bottom cover of the main body and connect the USB 2.0 Port on the unit and
the USB port of the computer using the USB 2.0 cable.
● Do not disconnect the connected USB cable without completing the proper
procedures to prevent data loss or a system error on the PC or the PMP.
(See‘Disconnecting the USB Cable’.)
3
The ‘Searching for a new device’ message appears and the USB driver is installed.
The installation screen may not be displayed. Open the Device Manager and check
whether the device driver is properly installed.
4
When the USB driver is installed, “
USB 2.0 Storage Device USB Device
” will be displayed
in the
[Device Manager]
.
5
If the USB driver has not been properly installed, install the USB driver manually
referring to “
Installing the USB Driver Manually
”.
Yellow
Red
White
Yellow