Operation manual / Spare parts list
Single disc machines
7
2.5
Basic safety notes
The Roll-single disc machine was designed and constructed for its intended use in accordance with
the generally approved rules of technology, the industrial safety and accident prevention regulations,
and the directive for the safety of machines of the EC.
•
Certain dangers may be occurring during the operation of the machine despite all safety and
security measures and facilities. This is especially true if
- improper operation or
- improper application
are the cause.
•
Failing to adhere to the operation instructions, in particular to the safety notes, will create danger
of injuries or even of fatal injuries as also danger of damage to physical assets.
Warning, Danger of electrical shocks
Do not use damaged lines and plugs.
The machine may be operated only in a technically flawless condition and with all safety
facilities fully operational.
•
The parts of the machine that rotate with high rpm. Are protected by protection measures against
accidental contact respective introduction of hands.
At some building sites, especially in buildings where the power mains and the fuses are not known, a
commercial FI safety plug must be used for safe operation of the machine.
2.6
Prerequisites for the user
The users of the machine are required to
•
be instructed with the operation of the machine,
•
be familiar with and able to execute the operations required for the handling and assembly of the
machine,
•
be aware of and know the applicable safety regulations for the operation of such machines and
adhere to these (cf. The chapter “Preliminary marks”),
•
be informed about possible additional local (national) regulations (e.g. with respect to safety
facilities),
•
be informed about potential threats and dangers arising from the operation of such machines.
